Also prefix octal 0, in case these files are actually of modes that
don't start with 0 by accident (such as SUID or sticky bit).
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This helps with old Debian which has ancient iproute2, as well as paving
the path toward this script supporting userspace implementations.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This doesn't actually fix a real problem, but it is more correct than
not having it.
Suggested-by: Aaron Sigel <aaron@vtty.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Maybe an attacker on the system could use the infoleak in /proc to gauge
how long a wg(8) process takes to complete and determine the number of
leading zeros. This is somewhat ridiculous, but it's possible somebody
somewhere might at somepoint care in the future, so alright.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This was only required because clueless network operators were trying to
route fec0::/10 globally, when that range doesn't actually have global
scope. Now that we understand the cause was operator error, we revert
the change here, so that the routing table is kept consistent.
This reverts commit 64e47de870a2f0575b5564a70e5680b48ab83ff9.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Otherwise, we wind up not doing the right thing in the v6-only case, or
doing something totally borked when v4 and v6 are filled unevenly.
Reported-by: Roelf Wichertjes <contact@roelf.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
While OpenResolv supports explicit ordering directives such as `-m` and
exclusivity directives such as `-x`, Debian's own resolvconf supports
none of this, instead using a hard coded list of interface name
templates for determining ordering. While trying to emulate `-x` is
difficult [*], we can at least try to mostly emulate `-m 0` by
masquerading as a `tun*` interface to resolvconf. Ugly, but it works.
[*] One heavy handed way of emulating `-x` would be something like:
# echo nameserver 8.8.8.8 > /etc/resolv.conf.wg0-exclusive
# mount --bind -o ro /etc/resolv.conf.wg0-exclusive /etc/resolv.conf
# rm -f /etc/resolv.conf.wg0-exclusive
This in practice works quite well, but is a bit heavy to put in a man
page. It also doesn't "stack" well. For example, if we simply run
`umount /etc/resolv.conf`, how do we know which resolv.conf entry we're
unmounting?
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Otherwise, traffic is sent with the IP address of a different interface,
and then packets don't actually get delivered.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Old versions of ip(8) do not accept arguments to `ip rule show.` This
patch works around that limitation.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than just using /dev/null to mean key removal, match on any empty
file, so that this interface is cross platform.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
DESTDIR is always empty, no need to check anything there. Check the main
system instead.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
'bandwidth' is a measure of speed, but wg's output shows only the
number of bytes transferred. Thus 'transfer' is a better label.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Some people run wg(8) using hard coded v6 addresses before interfaces
have v6 addresses, causing getaddrinfo to fail. Since AI_ADDRCONFIG
doesn't actualy change the sorting, but just the queries made, we don't
really need AI_ADDRCONFIG anyway, since we're always only taking the
first result.
Reported-by: Benedikt Morbach <benedikt.morbach@googlemail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
I happen to like it, but package managers don't. The GNU standard [1]
says there should be a separate install-strip target. I don't like
duplicating code like that. So, instead, I'll just remove stripping all
together.
[1] https://www.gnu.org/prep/standards/html_node/Standard-Targets.html
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The C standard states:
A declaration of a parameter as ``array of type'' shall be adjusted to ``qualified pointer to
type'', where the type qualifiers (if any) are those specified within the [ and ] of the
array type derivation. If the keyword static also appears within the [ and ] of the
array type derivation, then for each call to the function, the value of the corresponding
actual argument shall provide access to the first element of an array with at least as many
elements as specified by the size expression.
By changing void func(int array[4]) to void func(int array[static 4]),
we automatically get the compiler checking argument sizes for us, which
is quite nice.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
They have no permissions, so we're probably better off just creating a
socket file with the umask set, as we do in BSD.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is designed to work with a server that follows this:
struct sockaddr_un addr = {
.sun_family = AF_UNIX,
.sun_path = "/var/run/wireguard/wguserspace0.sock"
};
int fd, ret;
ssize_t len;
socklen_t socklen;
struct wgdevice *device;
fd = socket(AF_UNIX, SOCK_DGRAM, 0);
if (fd < 0)
exit(1);
if (bind(fd, (struct sockaddr *)&addr, sizeof(addr)) < 0)
exit(1);
for (;;) {
/* First we look at how big the next message is, so we know how much to
* allocate. Note on BSD you can instead use ioctl(fd, FIONREAD, &len). */
len = recv(fd, NULL, 0, MSG_PEEK | MSG_TRUNC);
if (len < 0) {
handle_error();
continue;
}
/* Next we allocate a buffer for the received data. */
device = NULL;
if (len) {
device = malloc(len);
if (!device) {
handle_error();
continue;
}
}
/* Finally we receive the data, storing too the return address. */
socklen = sizeof(addr);
len = recvfrom(fd, device, len, 0, (struct sockaddr *)&addr, (socklen_t *)&socklen);
if (len < 0) {
handle_error();
free(device);
continue;
}
if (!len) { /* If len is zero, it's a "get" request, so we send our device back. */
device = get_current_wireguard_device(&len);
sendto(fd, device, len, 0, (struct sockaddr *)&addr, socklen);
} else { /* Otherwise, we just received a wgdevice, so we should "set" and send back the return status. */
ret = set_current_wireguard_device(device);
sendto(fd, &ret, sizeof(ret), 0, (struct sockaddr *)&addr, socklen);
free(device);
}
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We don't want people packaging these or even using these scripts, which
are only useful for limited development circumstances, so get rid of
them. More widespread development testing techniques still exist in
src/debug.mk and src/netns.sh
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Jason A. Donenfeld
Pim van Pelt
Christian Hesse
Tomasz Torcz
Daniel Kahn Gillmor